Archive

Archive for the ‘Small Gift Box’ Category

Small Gift Box

June 23, 2019 Leave a comment

It’s been a while since dovetails were part of a project. However a small gift was needed so a small box was required. A piece of cherry left over from the cabinet would become the sides and Sapele left over from the small tool chest became the top and bottom.

Cutting the cherry board such that the grain continues around the box may not be apparent to everyone, but knowing where this box is going it was important to add in the small details. Several practice cuts and muscle memory took over as the dovetails were cut.

Work with a #4 plane smoothed the edges and cleaned up the dovetails. The top and bottom cut from the Sapele have edges rounded using the same #4 plane. The bottom is simply glued onto the sides and after a night in the clamps a quick sanding allowed the finish process to begin. The top has a couple of stops glued to the bottom the keep the top in place.

Next a quick sanding and I began applying Shellac. Several coats later and the box was complete.