orepass

Looking down the file I can clearly see each tooth as I work to sharpen. The height is correct. However, I have come across a couple of problems that are probably related.

I did a poor job drilling the hole for the bolt that tightens the clamp. The cant does not allow the full force of the nut to tighten the vise. As I sharpened the saw slipped slightly. I will plug the bolt hole and re-drill to fix this and consider a small piece of Leather the hold the saw. The second item is the hinge is not as tight as I would like. It does not affect the clamp but bothers me. I may replug that hole and redrill as well. Seems that a little more patience in the drilling department is in order.