Archive

Archive for January, 2020

Real – Tool Tote

January 14, 2020 2 comments

In the last post I intended to include a tool tote that was also in the antique store. Several things caught my eye; The sides of the tote are much thinner than the ends 3/8″ vs 1″. Clearly this was done to save weight. The Tote was designed to handle full length panel saws and I can imagine that fully loaded it was quite heavy. Next time I go into an antique store I will bring a tape measure, looking at the pictures I have many questions myself.

IMG_7329

IMG_7328

Categories: Uncategorized

Old Tool Chest and Layout Tools

January 10, 2020 Leave a comment

Looking through the photographs I took while wandering through antique shops and wanted to share an interesting tool chest that I came across.

IMG_7324

Certainly someone can do a decent job of dating the chest. It wasn’t the chest that made me take a second look, but the layout tools that were carefully stored under the lid

IMG_7323

Neatly stowed in the lid is a square, 45 degree (best guess), compass, metal triangle (square) and somethiing missing. Certainly the craftsman that used this tool box had a specific task that required these tools. Anyone have a thought?

 

A couple of other benches were in the store, enjoy the photos.

 

Categories: Tool Chest

Bench Dog Design

January 5, 2020 5 comments

Wandered through an antique shop today and noticed several benches and tool chests. Typically I prefer junk stores since their pricing is reasonable and people understand what you are looking for and how it’s used. During my wanderings there were several benches, but the dogs on this bench caufgt my eye.

IMG_7320

Perhaps I should have looked at the price of the bench, but by the time I was in this part of the store sticker shock had worn off and I was in cruise mode. It’s a very nice bench with decent proportions and a couple of nice vises that worked well. I imagine this will ultimately end up in a kitchen somewhere.

The bench dogs were quite large and moved smoothly up and down. They were held in place by a thin piece of wire.

They did not appear to hve been used often but I can imagine the wire would eventually create a groove in the bench top. Don’t think I will change the design on my bench but always fun to look at options.

Categories: Roubo