Home > Uncategorized > Firewood to Lumber

Firewood to Lumber

A coworker shared some firewood with me a couple months back; while unloading it I noted that several of the pieces were very heavy. The wood appeared to be oak, but I wasn’t sure and after setting up my bandsaw the opportunity to take a peak arrived.

My first step was to build a sled that along with a couple of wedges would hold it upright and allow me to create one flat edge. As you can see the sled is nothing fancy, a few pieces of plywood screwed and glued together.

Setting up for the first cut I noticed that the piece had several cracks running vertically. I guessed that this may be indicating that it happened to be qtr sawn so that is how I placed it onto the sled for the first cut. As the bandsaw sliced away the rough surfaces, underneath was a beautiful piece of oak with some very nice medullary rays.

Cutting the wood into 3/4” thick pieces I was left with a several nice boards that will make a beautiful box. I think I may give it to my firewood suppler. You never know what is hidden away under the bark and rough exterior.

Categories: Uncategorized
  1. leonardjnovak
    February 27, 2021 at 2:05 pm

    Wow, what beauty of the natural oak you unlocked!

  1. No trackbacks yet.

Leave a Reply to leonardjnovak Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: